Use And Maintenance; Up And Down Buttons; Adding/Deleting Io Control Points; Replacing A Lost Or Broken Somfy Io Control Point - SOMFY Heating Slim Receiver io 2kW Notice

Heating Slim Receiver io 2kW

3. USE AND MAINTENANCE

This product is maintenance-free.

3.1. UP AND DOWN BUTTONS

• To switch the heating lamp on:
- Briefly press the Up button.
• To switch the heating lamp off:
- Briefly press the Down button.

3.2. ADDING/DELETING IO CONTROL POINTS

Refer to the corresponding guide.

3.3. REPLACING A LOST OR BROKEN SOMFY IO CONTROL POINT

To replace a lost or broken io-homecontrol® control point, consult a home motorisation and
automation professional.
3.4. QUESTIONS ON THE IO 2KW HEATING SLIM RECEIVER?
Observations
Pressing a button on the con-
trol point has no effect on the
heating lamp

4. TECHNICAL DATA

Radio frequency
Frequency bands and maximum power used
Index protection rating
Electrical insulation
Operating temperature
Power supply
Total max. power in Watts (W)
Rated current
Rated impulse withstand voltage
Operation type
Copyright © 2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Possible causes
The batteries in the control
point are low.
The heating lamp is damaged.
868-870 MHz io-homecontrol®, two-way tri-
band
868.000 MHz - 868.600 MHz e.r.p. <25 mW
868.700 MHz - 869.200 MHz e.r.p. <25 mW
869.700 MHz - 870.000 MHz e.r.p. <25 mW
IP 54
Class I
-20°C to +50°C
230 V
2,000 (2E3)
9 A
2.5kV
S1
Solutions
Replace the batteries, using the
same battery model.
Contact an installer.
50 Hz
EN
23