Introduction; Scope Of Application; Liability; Installation - SOMFY Heating Slim Receiver io 2kW Notice

EN

1. INTRODUCTION

1.1. SCOPE OF APPLICATION

The io 2kW Heating Slim Receiver is a receiver fitted with io-homecontrol® radio technology. It can
be used to control most electric heating lamps (maximum 2,000 W) via an io-homecontrol® control
point (for more details, contact your retailer).
Its small size enables it to be discreetly installed near the product it is controlling through a direct
supply cable connection.
The io 2kW Heating Slim Receiver with standard connections is connected to the heating lamp by
means of suitable connectors.

1.2. LIABILITY

Before installing and using the io 2kW Heating Slim Receiver, please read these instructions carefully.
The io 2kW Heating Slim Receiver must be installed by a home motorisation and automation
professional, in accordance with Somfy's instructions and the applicable regulations in the
country of installation.
Any use of the io 2kW Heating Slim Receiver outside the scope of application described above is
prohibited. Such use, and any failure to comply with the instructions given in this guide, absolves
Somfy of any liability and invalidates the warranty.
The installer must inform his customers of the io 2kW Heating S lim Receiver operating and maintenance
conditions and give them the operation and maintenance instructions after installing the io 2kW
Heating Slim Receiver. Any after-sales service operation on the io 2kW Heating Slim Receiver requires
intervention by a home motorisation and automation professional.
Never begin installing without first checking the compatibility of this product with the associated
equipment and accessories.
Should any doubt arise during installation of the io 2kW Heating Slim Receiver or for additional
information, consult a Somfy contact or visit www. somfy.com.

2. INSTALLATION

2.1. INSTALLATION RECOMMENDATIONS

• Minimum distance
Heating Slim Receiver and the earth: X = 150 cm
• Minimum distance
Heating Slim Receiver and an io control point: Y = 30 cm
• Minimum distance
Heating Slim Receivers: Z = 20 cm
Installation of the io 2kW Heating Slim Receiver depends on the
lamp with which it is used; consult the technical specifications
provided by Somfy (see 4.).

2.2. ASSEMBLY - WIRING

Warning
Comply with current standards and legislation in the country of installation.
18
(X) between an
(Y) between an
(Z) between two
Copyright © 2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Heating Slim Receiver io 2kW
io 2kW
io 2kW
io 2kW
X
Z
Y