Faber FEG4916F Manuel D'instructions page 18

PROGRAM MODE
selected
ON TIME SETTING (PROGRAM 1):
7.
AM
displayed shortly, and hour ashes.
PM
8. To select hour press
ON
OFF 9. To con rm press
1
is displayed,
and minutes ash.
10. To select minutes press
button.
11. To con rm press
OFF TIME SETTING (PROGRAM 1):
12.
AM
displayed shortly, and hour ashes.
PM
13. To select hour, press
ON
14. To con rm press
OFF
1
OFF is displayed,
shortly, and minutes ash.
15. To select minutes press
button.
To con rm press
16.
NOTE: Either continue to PROGRAM 2 and set ON and OFF
times or stop programming at this point, and
PROGRAM 2 remains deactivated.
NOTE: PROGRAM 1 and 2 use the same ON (Thermostatic)
and OFF temperatures for
( , , , , , , ). Once a new ON (Thermostatic)
and/or OFF temperature has been set, that
temperature becomes the new default setting.
NOTE: If , or Daily Timer are programmed for
PROGRAM 1 and PROGRAM 2 ON and OFF times,
thesebecome the new default times. The batteries
must be removed to clear the PROGRAM 1 and
PROGRAM 2 ON and OFF times and temperatures.
or Daily Timer ( , , , , , ,
▪ Set ON time and OFF time using same procedure as
"selected" (above).
▪ : Set ON time and OFF time for both Saturday and Sunday.
▪ Daily Timer: Unique ON and OFF times may be set for a single
day of the week, for multiple days of the week, or for every day
of the week.
Wait to nish setting.
, , ON is displayed, is
or button.
, , ON
button.
displayed shortly,
or
button.
, , OFF is displayed, is
or button.
button. , ,
is displayed
or
button.
, and Daily Timer
) selected
2 BURNER FEATURE
ND
The latching solenoid valve will open automatically after ignition
or after switching the system OFF, so that the maximum ow of
gas is supplied to both burners assisting with the ignition process.
After pressing the button for the 2
7 seconds in the ON direction until the max. position is reached.
ON:
▪ To switch a burner ON, press the
AM
button.
PM
▪ displayed.
ON
OFF
OFF :
▪ To switch the burner OFF, press the
▪ disappears.
NOTE: The latching solenoid valve cannot operate manually. If
the Receiver battery runs down it will remain in the last
operating position.
ECO MODE
ON:
▪ Press
AM
▪
OFF :
1. Press
2. Press
Mode.
3. Press
Mode.
4. Press
Mode.
CIRCULATING FAN OPERATION
Does not apply to the models
referenced in this manual.
AM
Burner the motor will turn
nd
button.
button to enter Eco Mode.
is displayed.
button.
or button to enter Manual
button to enter Thermostatic
button to enter Program
18