Wall Switch - Optional - Faber FEG4916F Manuel D'instructions

Wall Switch - Optional

If you wish to install the wall switch option, you will need to purchase the
GV60 Wall Switch Accessory Kit from your authorized gas fireplace dealer .
The GV60 Wall Switch Accessory Kit can be purchased separately as an option to
control the fireplace . The accessory kit includes a wall switch, a wall plate, and a
cable available in various lengths .
The following operations can be done from the wall switch:
• Turn the fireplace on and off .
• Increase and decrease the flame height .
The thermostat and programming functions are not available with the wall switch .
The fireplace receiver will respond to both the wall switch and the remote control
commands, regardless of what was used to turn the fireplace on .
Combination with Wall Switch
1 . Remove the cable plugged in the wall switch harness connection on the receiver
(Image 1) and replace with cable provided in wall switch accessory kit .
2 . Insert the plug connector into the receiver (Image 2) .
Image 1: Location of wall switch harness
connection indicated by arrow
Image 2: Insert plug connector into the receiver .
52