Spacers; Spacer Plate (Optional) - Winkhaus blueMatic EAV Instructions D'installation

blueMatic EAV
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
STK/RNT
5.3

Spacers

Spacers for profile adjustment of the frame part
tappet contact and frame part powerpack sup-
ply (cf. plastic profiles), in packages of 10 pieces
in a plastic bag. For assignment of spacer to pro-
file, see 2.1..
5.4

Spacer plate (optional)

6 mm spacer plate for installation between face
plate and sash part to reduce the tappet length,
e.g. due to:
• 9 mm Eurogroove position, small Eurogroo-
ve positions
• With a small residual airgap
• For specific hinge situations (e.g. concealed
hinges)
NOTICE
Spacer plates are used to reduce the tappet vi-
sible width in case of problems with premature
tappet contact with the profile.
2 countersunk screws 3 x 14 ST TX10 (included
in the tappet STV set) length sufficient for face
plate and spacer plate
Description
STV-SPACER PLATE
6 MM KS SW
17 5051251
Art.-No.
5035743
EN
2