Winkhaus blueMatic EAV Instructions D'installation page 113

blueMatic EAV
Error
No electrical fun-
ction (general)
Problems with
mechanical fun-
ction (automatic
locking system)
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
STK/RNT
Possible cause
• Frame power
supply: Cable for
external signal not
adequately insula-
ted or connected
to external voltage
• Incorrect power-
pack supply (24 V)
installed
• Latch does not
extend/ rod does
not move freely
• Inadequate
maintenance /
lubrication
53
Rectification
- Check/provide wire insu-
lation (white and brown) or
remove external voltage
- Install correct power supply
12 V DC
- Inspect fitting groove and
screw connection
- Grease appropriate points,
e.g. latch and hook
5051251
EN
5