Cable Transition - Winkhaus blueMatic EAV Instructions D'installation

blueMatic EAV
The WINKHAUS frame power supply has an input that can be combined with a
potential-free contact - min. switch time of 0.5 seconds - with external access
control systems (such as wireless systems, transponder systems, fingerprint
scanners, etc.).
6.3

Cable transition

- max. 48 V and/or max. 2.0 A per wire
- 6 contacts, for use with blueMatic EAV,
intended for 2 x voltage, "+" / "-" (earth) / 4 x signal
- Use in aluminium, plastic and wooden doors, etc.
- Service life: approx. 200,000 cycles
- Dimensions: Frame part approx. 11 x 10 mm (WxD), sash part approx. 16 x 10
mm (WxD)
Total length (with spring approx. 260 mm)
- Screw connection: Screws approx. 3 x 20mm (included in the scope of deli-
very), profile-dependent positioning
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
STK/RNT 55 5051251
EN
6