Use Contrary To The Intended Purpose - Winkhaus blueMatic EAV Instructions D'installation

blueMatic EAV
• used in doors made of wood, plastic and aluminium in private residences and
in public buildings;
• assembly and electrical installation take place according to our mounting
instructions. Incorrect wiring can destroy the electronics.
• treated regularly according to the maintenance and care instructions, oiled
at least 2 x annually or more frequently as needed on defined moving parts
(mechanical components of the lock), the tappet contact contact surfaces
and tappet are greased semi-annually (for recommended greases, refer to 4.
Maintenance and care)
• only used in technically fault-free condition;
• not used if signs of wear are detected,
• repaired by trained professionals in the event of malfunctions.
The supplier/manufacturer does not accept any liability for personal injury or
material damage caused by incorrect operation or improper use.
1.3

Use contrary to the intended purpose

The locking systems are not designed to absorb or compensate for any mo-
vement changes or in the closing mechanism of the door caused by changes in
temperature or in the structure of the building.
The tappet contact/frame power supply must not be installed in damp rooms
or rooms with aggressive corrosive air content (such as an electroplating shop).
Incorrect use of the locking systems is evident if:
• the instructions on the intended use are not being followed;
• the problem-free operation is hindered due to the installation of external
items that are not suitable or block the external outside function.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
STK/RNT 7 5051251
EN
1