Winkhaus blueMatic EAV Instructions D'installation page 73

blueMatic EAV
No. Description
autoLock AV3 (automatic locking system STV-AV3 ....)
1
Motor housing EAV3
2
Keep rail STV-SL .../
3
set Keep rail STV-GRT. SL .../
Single keep STV-SB ...
Center keep STV-SB FRA ... AV ...
4
STV-SET tappet contact consisting of sash part and
5
frame part with cable for connection to the frame power
supply (plug-in), length 0.6 m
Cable for sash part tappet contact connection to the
5.1
EAV motor housing, plug-in, length 2 or 3.5 m
Cover for wood, 4 mm airgap for frame part tappet
6
contact or frame power supply (not shown)
Frame power supply
7
Cable for connection to frame part tappet contact,
7.1
plug-in
Cable for connection of external access controls, e.g.
7.2
intercom system, potential-free contact, wires separated
and insulated
Cable for connection to the mains voltage, with wire end
7.3
ferrules, Schuko plug connector to be mounted by the
customer
Cable with ∅ 4 mm eyelet for door profile earthing
7.4
Schuko plug connector CEE 7/7 230 V AC
8
Door handle (customer-provided/not included in the
T
scope of delivery)
A MUST! be used. Remaining components recommended for use or recom-
mended for alternative use
B as an accessory/ optionally available
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
STK/RNT 13 5051251
A*
X
X
X
X
X
X
EN
B*
2
X
X
X
X
X
X
X
X