Roland VersaCAMM SP-540i Mode D'emploi page 12

Masquer les pouces Voir aussi pour VersaCAMM SP-540i:
Table des Matières

Publicité

This machine weighs 160 kg (353 lb.). Media weighs 30 kg (66 lb.).
WARNING
Install the machine in a location that is
level, stable, and able to bear the weight
of the machine.
The total weight of the machine may reach 160
kg (353 lb.) or more (120 kg (265 lb.) or more
for the 30-inch model). Installation in an un-
suitable location may cause a major accident,
including tip over, fall, or collapse.
Unloading and emplacement are opera-
tions that must be performed by six per-
sons or more (by four persons or more for
the 30-inch model).
Tasks that require undue effort when per-
formed by a small number of persons may
result in physical injury. Also, if dropped, such
items may cause injury.
Danger of fi re, burns, or toxic gas emissions
WARNING
Caution: high temperatures
Areas such as the dryer become hot. Exercise
caution to avoid fi re or burns.
When printing is not being performed,
remove any loaded media or switch off
the power.
The continued application of heat at a single
location may cause the release of toxic gases
from the media or pose a fi re hazard.
WARNING
Be sure to lock the stand's casters.
If the machine should begin to topple, a major
accident may result, including crushing of the
appendages or the body.
When storing roll media, implement ad-
equate safety measures to ensure that the
stored media will not roll, fall, or topple
over.
Danger exists of becoming pinned under the
media and suffering serious injury.
Handling roll media is an operation that
must be performed by two persons or
more, and care must be taken to prevent
falls.
Attempting to lift heavy media in a manner
that taxes your strength may cause physical
injury.
WARNING
Never use media that cannot withstand
heat.
Doing so may degrade the media, or may
result in fi re or the release of toxic gases.
To Ensure Safe Use
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Versacamm sp-300i

Table des Matières