Technical Data - Kollmorgen S300 Données Techniques

Technical Description | 2 Expansion card -I/O-14/08-

2.3 Technical data

Control inputs
Signal output
Supply inputs, to IEC 61131 24V (18...36V) / 100mA plus total current of the outputs
Fusing (external)
Connectors
Cables
Waiting time between
2 motion tasks
Addressing time (minimum)
Starting delay (maximum)
Response time of digital
outputs
The 24VDC voltage has to be supplied by an electrically isolated power supply, e.g. with
insulating transformer.
2.4 LEDs
Two LEDs are mounted next to the terminals on the expansion card. The green LED signals
that the 24V auxiliary supply is available for the expansion card. The red LED signals faults in
the outputs from the expansion card (overload of switching components, short-circuit).
2.5 Entering a motion block number (example)
Motion block number
binary 1010 1110
decimal 174
8 Kollmorgen | kdn.kollmorgen.com | March 2021
24V / 7mA , PLC compatible, IEC 61131
24V / max. 500mA , PLC compatiblel, IEC 61131
(depends on the input wiring of the controls)
4 AT
MiniCombicon, 12-pin, coded on PIN1 and 12
Data – up to 50m long : 22 x 0.5 mm², unshielded,
Supply – 2 x 1mm², check voltage drop
Depends on the response time of the control system
4ms
2ms
max. 10ms
A7 A6 A5 A4
1 0 1 0
128 - 32
A3 A2 A1
1 1 1
- 8 4 2
A0
0
-