Front View - Kollmorgen S300 Données Techniques

2 Expansion card -I/O-14/08-
This section describes the additional features that the expansion card -I/O-14/08- provides
for the servo amplifier.
The -I/O-14/08- provides you with 14 additional digital inputs and 8 digital outputs. The func-
tions of the inputs and outputs are adjustable with the setup software.
The 24V DC voltage must be supplied by an electrically isolated power supply (e.g. with iso-
lating transformer).
The I/Os are used to initiate the motion tasks that are stored in the servo amplifier and to
evaluate signals from the integrated position control in the higher-level control system. The
functions of the inputs and signal outputs correspond to the functions that can be assigned to
the digital I/Os on connector X3. All inputs and outputs are electrically isolated from the servo
amplifier by optocouplers.

2.1 Front view

2.2 Installation
Before starting work, switch off the power to the device
Use a suitable screwdriver to lever off the cover of the option slot.
Take care that no small items (such as screws) fall into the open option slot.
Push the expansion card into the slot.
Use the screws provided to fasten the front plate of the expansion card in place.
Technical Description | 2 Expansion card -I/O-14/08-
Kollmorgen | kdn.kollmorgen.com | March 2021 7