Basic Settings; Drying Level; Crease Protection; Cooling - Schulthess Spirit proLine TRI 9250 Manuel

Basic Settings

The machine has basic settings from the factory. It can
be adapted to the user's individual needs either when first
used or later using the following functions.
The basic settings can only be changed if no dry pro-
gramme is running. To change a basic setting, it is first
necessary to hold the programme button pressed and
then press the fast forward button. The corresponding
function is shown on the digital display. The display
changes when the fast forward button
repeatedly with the programme button held down.
The basic settings on your machine may be blocked.
However, the time setting and language selection functi-
ons are available.
Example:
Drying level (ex factory NORMAL)
+
When this function is switched on, the level of dryness
for the moisture controlled programmes (Cabinet and
Extra dry) is slightly increased and the laundry will be
slightly drier.
Crease protection (ex factory 30 MIN)
+
When this function is switched on, the crease protection
phase begins at the end of the programme.
Cooling (ex factory OFF)
+
With this function switched on, the cooling-down phase
is extended in some programmes
Time (the time is not set ex factory)
+
The hours can be set using the
minutes using the
is pressed
Function switched off
Function switched on
button and the
button.
55
Language (ex factory GERMAN)
+
The basic language is changed and is retained even
after switching the machine off or putting it in sleep
mode.

Extended basic settings

+
u By pressing these three buttons at the same time,
the display shows the extended basic settings.
u Repeatedly pressing the
possible settings.
u Pressing the
changed.
u Pressing the
settings.
Child lock (ex factory OFF)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing
or deletion of a programme by small children.
Start a programme with the child lock switched on:
+
Hold the start button down and press the fast forward
button.
Button memory (ex factory OFF)
Select «Extended basic settings»!
If the button memory function is activated, the last pro-
grammes used will be saved for both the «Mangle
moist» and «Wet-Clean» programmes. When one of
these programmes is selected again, the last program-
me used is automatically selcted.
LCD Brightness (ex factory 150)
Select «Extended basic settings»!
The button can be used to alter the brightness or
text on the display.
LCD Contrast (ex factory 26)
Select «Extended basic settings»!
The button can be used to alter the contrast on the
display.
÷
+
button shows the
button allows the settings to be
button ends the display of the