Guidance And Manufacturer's Declaration- Electromagnetic Emissions - Apex iX Sense CPAP System Manuel D'instructions

iX Sense / English
Appendix A: EMC Information

Guidance and Manufacturer's Declaration- Electromagnetic Emissions:

iX series is intended for use in the electromagnetic environment specified below. The user of this device
should make sure it is used in such an environment.
Emissions Test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC61000-3-2
Voltage fluctuations /
Flicker emissions
IEC61000-3-3
Warning:
1. iX series should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is
necessary, the device should be observed to verify normal operation in the configuration in which it will be
used.
2.Use of accessories, transducers and cables other than those specified or provided by the manufacturer of
this equipment could result in increased electromagnetic emissions or decreased electromagnetic
immunity of this equipment and result in improper operation.
3. Portable RF communications equipment (including peripherals such as antenna cables and external
antennas) should be used no closer than 30 cm (12 inches) to any part of the device, including cables
specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.
4. If there is a possibility of electro-magnetic interference with mobile phones, please increase the distance
(3.3m) between devices or turn off the mobile phone.
Compliance Electromagnetic Environment-Guidance
iX series uses RF energy only for its internal function. Therefore,
Group1
its RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment
Class B
iX series is suitable for use in all establishments, including
Class A
domestic establishments and those directly connected to the
public low-voltage power supply network
Complies
32