Apex iX Sense CPAP System Manuel D'instructions page 13

iX Sense / English
3.2.3 Disconnecting accessories – Humidifier and Light grey tubing
After assembling th humidifier with the device, the user can connect
the Light grey tubing with the rotatable air outlet located on the top
of the humidifier.
Note: Heated tubing is not supported on iX Sense devices.
Plug the power connector into the rear of the device. Connect one
end of the power cord into the power supply unit and the other end
into the power outlet.
Connect the free end of the air tubing firmly onto the assembled
mask. See the mask user guide for detailed information.
Recommended masks are available on www.apexmedicalcorp.com
Humidifier
Slightly press the release button on the humidifier, and the device
will disconnect from humidifier. Now you can horizontally pull the
device away from the humidifier.
Warning: Always empty the water inside the water chamber
of humidifier after every usage.
Note: To avoid damage, please do not forcefully disconnect the
device without pressing the release button.
Light grey tubing
Tubing could be horizontally removed from the device by holding
both sides of the cuff.
Note: To avoid damage, please do not hold the conjunction area
between the tubing and cuff when removing the tubing.
10