Apex iX Sense CPAP System Manuel D'instructions page 27

iX Sense / English
Alarm
System fault
E100-XX (primary function can be
executed)
System fault
E101-XX (primary function cannot
be executed)
Low Pressure
1. Press any buttons to return to standby
mode.
2. Re-plug and the device will-
automatically re-upload data.
3. Contact your equipment provider. Do not
open the device.
Contact your equipment provider. Do not open
the device.
1. Check the condition of the tubing.
2. Connect the tubing properly.
3. Connect the humidifier properly.
4. Connect the water chamber properly.
5. Close the chamber properly.
6. Make sure the mask is perfectly sealed
on user's face.
24