Apex iX Sense CPAP System Manuel D'instructions page 15

iX Sense / English
3. CONFIRM Button
Confirm setting: After adjusting the setting parameters, you can press "CONFIRM" to
confirm setting parameters (Please refer to 4.3 Function Descriptions for more details).
4. UP/DOWN Button
Adjust setting: After entering the user menu, you can press "UP/DOWN" for changing each
settings, then press "Confirm" button for confirmation and press
next setting.
4.2 Getting Started – First time use
For first-time use, follow the steps below:
1. Make sure that your doctor or care provider has initialized and configured the appropriate
treatment values and the correct date and time into the unit. Please make a consult with your
doctor periodically to reassess the setting of the therapy for effectiveness.
2. Make sure that you have a mask with headgear. If not, your doctor or care provider can
recommend the type of mask and headgear you must obtain.
3. Attach power cord to an electrical outlet (please refer to 3.2 Setting up). The device will turn on
automatically.
4. Attach tubing and mask (please refer to 3.2 Setting up)
5. Use the "MENU" button and "UP/DOWN" button to set up and read setting parameters.
Note : These values may have already been set by your doctor or care provider.
Note : make sure SD has been inserted into the SD slot at the back side of the main device.
6. You can now place the Headgear and Mask over your head and face.
7. Press the "START / STANDBY" button – Airflow to the mask will begin.
Note : If power is interrupted during therapy, the device will return to the Home screen once power
is restored. You may resume therapy as needed.
12
"MENU"
again for the