Commissioning; Danger; Controls And Safety Features; Controls - JAC BA Serie Notice D'utilisation Originale

You will find the circuit diagram for the machine inside the electrical enclosure
(fig.9, n°18).
5.4

Commissioning:

Before commissioning, ensure there are no extraneous objects interfering with the machine's moving
parts.
Ensure first of all (after verifying electrical compatibility) that the motors are rotating in the right
direction; if so, the troughs will move in the right direction (otherwise switch 2 phases on the motor).
For machine operation, please refer to the "Operation" chapter.
5.5

Danger:

If the user or the machine is in danger, you must use the main isolator switch to cut the power supply
to the machine.
Keep clear of the tray proofers when they are in motion.
Remove the plug from the power socket before any maintenance and/or servicing work.
Any maintenance work or replacement of parts must be carried out by an approved agent.
6

CONTROLS AND SAFETY FEATURES

6.1

Controls:

Your machine is equipped as standard with a mechanical control panel (fig.3).
6.2

Work area:

The work and setting area is located at the access to the tray proofers (fig.2).
English
10