Transmitting Data To Pc; Data Analysis - Allmatic Clamp assist Instructions De Service

8 | Operation
2. Start data transmission by pressing the button
ð The limit LED
ð The radio LED
ð The progress display (3) increments to 100 %.
ð Data transmission completed.
If the connection is interrupted during data transmission, the update interval begins to incre-
ment. As soon as the connection is re-established, data transmission is resumed.
8.5.3

Transmitting Data to PC

w Display of the MEE switched on.
1. Connect MEE to a computer with a USB cable.
ð The display is switched off.
ð The MEE is detected as a removable medium.
2. Copy CSV files to the PC.
ð Data transmission completed.
The CSV data can be analysed with the ALLMATIC-Jakob Spannsysteme GmbH manufacturer.
8.5.4

Data Analysis

w Transmit data to PC.
1. Start Excel spreadsheet.
2. Load files via "Collect data".
ð Data are analysed.
File name
SxxxxxXy.csv
SxxxxxSy.csv
SxxxxxLy.csv
xxxxx = serial number of the spindle, y = gap of the CA spindle on the MEE
46 / 294
Limit
flashes green during transmission.
Radio
flashes red during transmission.
.
Type
Statistical data
Spindle data of the last 200 clamping cycles
Live data
ALLMATIC
Clamp assist