Cleaning; Storage - Allmatic Clamp assist Instructions De Service

9 | Cleaning

Battery replacement
w MEE switched off.
1. Unscrew cover (1) of the battery compartment.
Fig. 12: Battery compartment
1 Battery compartment
2. Remove defective/flat batteries.
3. Insert new/charged batteries.
ð Only insert batteries of the same type.
ð Ensure correct polarity.
4. Close the cover (1) of the battery compartment.
ð Batteries replaced.
Data sheet batteries of the MEE, see Appendix.
9 Cleaning
Use all-purpose cleaners or industrial cleaners only. Do not use scouring agents, high-pressure
cleaners or aggressive cleaning substances!
Remove dust deposits with a brush.
10

Storage

Store the MEE protected against direct sunlight in the anti-static bag provided.
Remove rechargeable batteries if the MEE is not used for more than three weeks.
52 / 294
1
ALLMATIC
Clamp assist