Example 3 - Amazone ZA-M Notice D'utilisation

Masquer les pouces Voir aussi pour ZA-M:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
5.3

Example 3

Fertiliser level in funnel half I is 4 scale lines
higher than in II.
Desired working width is exceeded.
Reduce working width.
Recommendation for ZA-M, ZA-V
Difference between scale lines = - 4
4 Scale lines + 1 Scale line = 5 Scale lines
1. Reset all 4 spreading vanes by 5 scale lines
to lower scale value.
2. Repeat working width check.
3. If resetting to end position of spreading
vanes is insufficient, fit spreader disc with
smaller working range (e.g. replace spread-
er disc OM 18-24 with OM 10-16, take set-
ting data for 16 m working width from set-
ting chart taking into consideration type of
fertiliser.)
Recommendation for ZA-Ultra
Difference between scale lines = - 4
4 Scale lines + 1 Scale line
2
Round up to whole scale lines = 3 scale lines
1. Reset all short vanes by 3 scale lines to
lower scale value.
2. Repeat working width check.
Mobile fertiliser test kit BAG0073.2 11.14
Fig. 5
= 2,5 Scale lines
Valuation of the fertiliser level
en
31

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Za-vZa-m ultraZa-uZa-f

Table des Matières