Stryker Trio 1033 Manuel page 19

Operation Guide
OPERATING OPTIONAL FOOT END BACK REST ARTICULATING HEAD PIECE
Foot End Back Rest
Head Piece
B
A
AXIS
AXIS
BOTTOM VIEW
To operate the articulating head piece, grasp either handle under the head section and squeeze. Handle (A)
releases one latch and rotates the head piece on axis "A". Handle (B) releases the other latch and rotates
the head section on axis "B". For ease of operation, it is recommended to release only one latch at a time.
WARNING
The weight of the patient's head is resting on the head piece and must be supported by the operator when
the latches are released and the head piece is being positioned. Failure to adequately support the head piece
while positioning the head could result in patient injury.
To avoid possible pinch points when adjusting the head piece, keep your fingers away from the jointed areas.
Do not reach between the side of the head extension and the articulating head piece to pull the release handle.
Finger injury could result.
1−16