Pair EduMic with hearing aids
Ensure EduMic is turned ON
16
About
Start-up
Handling Other modes Warnings More info
Enable pairing mode in hearing aids
1
2
1. Turn the hearing aids OFF by opening
the battery drawer.
2. Turn the hearings aids ON by closing
the battery drawer.
The hearing aids can now be paired with
EduMic within the next 3 minutes.
Pair the hearing aids
Max 20 cm
Place the hearing aids close to EduMic.
It is recommended to pair one set of
hearing aids at a time.
The status indicator will flash BLUE while
pairing is in progress.
Ready for use
The status indicator will stop flashing BLUE
when pairing is complete and turn GREEN.
EduMic is now ready for use with the
hearing aids.
If more sets of hearing aids need to be
paired, repeat these steps.
17