oticon EduMic Mode D'emploi page 26

Imported and Distributed by
Audmet Canada Ltd
1600-4950 Yonge St
Toronto, ON M2N 6K1
www.oticon.ca
50 About Start-up Handling Other modes Warnings More info
Description of symbols used in this booklet
Warnings
Text marked with a warning symbol must be read before using the device.
Manufacturer
The device is produced by the manufacturer whose name and address are stated next to the symbol.
Indicates the medical device manufacturer, as defined in EU Regulations 2017/745 and 2017/746.
CE mark
The device complies with all required EU regulations and directives.
Electronic waste (WEEE)
Recycle hearing aids, accessories or batteries according to local regulations.
Hearing aid users can also return electronic waste to their hearing care professional for disposal.
Electronic equipment covered by Directive 2012/19/EU on waste and electrical equipment (WEEE).
Regulatory Compliance Mark (RCM)
The device complies with electrical safety, EMC and radio spectrum requirements for devices supplied
to the Australian or New Zealand market.
Double insulation
Indicates that product power supply is double insulated. This means a very low risk of single fault
failures.
Indoor use
Indicates that the product is qualified for indoor use.
TwinLink 2.4 GHz
The device contains Bluetooth Low Energy (BLE) 2.4 GHz radio technology, which supports wireless
streaming to Oticon hearing aids with a 2.4 GHz receiver.
Hearing loop
This logo incorporates the universal symbol for hearing assistance. The "T" signifies that a hearing
loop is installed.
51