Connect To External Sound Sources - oticon EduMic Mode D'emploi

Connect to external sound sources

The 3.5 mm jack input allows you to connect EduMic to external sound sources like
a sound field system, smartboards or PC/tablets, etc.
Connect the jack cable
Insert the jack.
Connect the jack cable to the external
audio source.
Ensure EduMic is turned ON.
28 About Start-up Handling Other modes
Jack mode
When EduMic is streaming audio, the status
indicator is YELLOW.
The EduMic microphone is disabled in
jack mode.
Warnings More info
Mute/unmute
Press the button briefly to mute the audio
stream from EduMic.
The status indicator flashes YELLOW.
To unmute, press the button again briefly.
Return to microphone mode
2
1
1. Unplug the jack from EduMic.
2. The status indicator will turn GREEN and
EduMic will return to microphone mode.
29