Charge EduMic
Connect to power source
Charging
1
2
1. Insert the micro USB
The power indicator will
into the charging socket
flash YELLOW during
on EduMic.
charging.
2. Insert the wall charger
into a power outlet.
Or insert the USB
charger cable into a
USB power source.
20
About
Start-up
Handling Other modes Warnings More info
Charging complete
The power indicator will
turn GREEN when the
battery is fully charged.
Low battery indication
The power indicator starts flashing RED, when the battery
is running low. This will leave you two hours before the
battery runs out.
IMPORTANT NOTICE
When charging, the charging indicator should be lit as described in this booklet. If the
charging indicator is not lit as described, disconnect the device from the charger and
consult your hearing care professional.
When charging EduMic, use the supplied original USB cable or power supply
5.0V/1A, CE and safety marked.
21