Table Des Matières - Burkert 2100 Guide Rapide

Type 2100
CONTENTS
1 About these instructions........................................................ 4
1.1 Symbols ......................................................................... 4
1.2 Definition of terms.......................................................... 5
2 Intended use........................................................................... 5
3 Basic safety instructions ....................................................... 6
4 General information ............................................................... 8
4.1 Contact address............................................................. 8
4.2 Warranty......................................................................... 8
4.3 Information on the Internet............................................. 8
5 Technical data........................................................................ 8
5.1 Conformity ..................................................................... 8
5.2 Standards....................................................................... 8
5.3 Type label....................................................................... 9
5.4 Operating conditions...................................................... 9
5.5 Mechanical data........................................................... 12
6 Installation ............................................................................ 13
6.1 Safety instructions installation ..................................... 13
6.2 Preparatory work.......................................................... 14
Contents
6.3 Installing valve body ..................................................... 14
6.4 Installing devices with welded connection ................... 14
6.5 Installing control unit .................................................... 16
6.6 Turning actuator ........................................................... 16
6.7 Connecting device pneumatically................................. 17
7 Start-up .................................................................................. 19
7.1 Set middle position on 3-position actuator .................. 19
8 Deinstallation ......................................................................... 20
9 Transportation, storage, disposal......................................... 21
english 3