Important Notes; Intended Use; Symbols Used; Liability And Warranty - Schwamborn BEF 204 Traduction Du Manuel D'utilisation Original

EN Floor milling machine BEF 204

1 Important notes

1 Important notes
© Schwamborn Gerätebau GmbH
Schwamborn Gerätebau GmbH reserves all rights.
Any reproduction, use or distribution of this original
operating manual or the translations of the original
operating manual, in whole or in part, is prohibited
without the express written permission of Schwam­
born Baumaschinen GmbH. If the product described
here is altered without the consent of the manufac­
turer, then said manufacturer is not responsible for
any damage that may be incurred. Any such actions
will void the warranty.

1.1 Intended use

The machine may be used only with the accessories
supplied by the manufacturer for face milling of floor
surfaces such as:
— cement
— screed
— natural stone
Any other use of the machine can lead to dangerous
situations and is prohibited!
Risk of damage!
The machine may not be used for milling bitu­
men surfaces (e.g. roads, footpaths)!
Bitumen can adhere to the rotor, the housing
and the suction nozzle.
To ensure correct use of the machine, follow the in­
structions in the operating manual, paying particular
attention to any warnings and instructions relating to
operation and maintenance!
Before using the machine, the opera­
ting personnel must carefully read and
understand this operating manual!
Keep this operating manual close at
hand for easy reference!
If the machine is on loan to other parties, the opera­
ting manual must be provided with the machine and
its importance must be made clear.

1.2 Symbols used

The following symbols are used in this
documentation:
Safety instructions
This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some safety instructions are accompanied by
corresponding symbols.
Warning
Additional information
This symbol indicates additional information.

1.3 Liability and warranty

Liability or warranty is excluded if:
— The instructions in the operating manual have not
been observed.
— The machine or its attachments were improperly
operated.
— The maintenance was carried out inadequately or
incorrectly.
— Specified spare parts were not used.
— The protective equipment was not used, has been
altered or was removed.
— The specified power supply ratings and surroun­
ding conditions have not been observed.
The manufacturer is not liable for any damage that
may result if the user makes any changes to the ma­
chine without the manufacturer's permission. Any
such actions will void the warranty.
Prohibition Direction
13