Operating And Functional Elements; Colour Coding - Kärcher KM 100/100 R Bp Mode D'emploi

1 Key switch
2 Steering wheel
3 Seat (with seat contact switch)
4 Dust filter
5 Wet/dry flap
6 Cover
7 Rear sealing strip
8 Battery
(KM 100/100 R Bp Pack)
9 Charger (under the appliance hood)
(KM 100/100 R Bp Pack)
10 Side sealing strip
11 Waste container (both sides)
12 Side panels
13 Roller brush
14 Front sealing strip
15 Bulk waste flap
16 Pedal for raising/lowering bulk waste
flap
17 Left side brush (optional)
18 Fastener of the side brush
19 Right side brush
20 Drive pedal
21 Front panel
22 Operator console

Operating and Functional Elements

Operator console
1 Programme switch
2 Emergency-stop button
3 Filter dedusting
4 Horn
5 Operating hour counter
6 Indicator lamps
Indicator lamps
A Battery charge status (red/yellow/
green)
B Overload of the drive motor (red)
C Overload of the sweep roller (red)
EN
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.
DANGER
Danger of crushing while closing the ma-
chine cover. Hence, lower the machine
cover slowly.
 Open the device hood at the handle slot
(pull it upward).
 Pull the holding bar from the holder.
3
-

Colour coding

Open/ close device hood
19