Kärcher KM 100/100 R Bp Mode D'emploi page 28

Danger
Risk of injury! Before carrying out any tasks
on the machine, set the main key to "0" and
remove it. Press emergency-stop button.
Fault
Appliance cannot be started
Appliance moves only slowly
Machine is not sweeping properly Check roller brush and side brushes for wear, replace if necessary.
Dust gathers in the machine
Side brush does not turn
Poor cleaning performance at edg-
es
Side brush or roller brush switch-on
operation is not working
Insufficient vacuum performance
Roller brush does not turn.
28
Troubleshooting
Remedy
Sit on the driver seat, the seat contact switch gets activated.
Release emergency-stop button
Set main switch to "1"
Check the fuses.
Check battery; charge it if required.
Inform Kärcher Customer Service.
Check the position of the immobilizing brake
Inform Kärcher Customer Service.
Check function of bulk waste flap
Check sealing strips for wear, adjust or replace as required
Check belts of sweeping drive.
Check vacuum pressure system to see it is leak-proof.
Inform Kärcher Customer Service.
Empty waste container
Check suction fan drive belt
Check sealing cover on suction fan
Check dust filter, clean or replace
Check filter case seal
Close wet/dry flap
Check sealing strips for wear, adjust or replace as required
Inform Kärcher Customer Service.
Check the fuse.
Inform Kärcher Customer Service.
Replace side brush
Check sealing strips for wear, adjust or replace as required
Inform Kärcher Customer Service.
Check vacuum pressure system to see it is leak-proof.
Inform Kärcher Customer Service.
Check filter case seal
Check sealing cover on suction fan
Check hoses of suction blower for absence of leakness.
Insert lamella filter correct; see Changing dust filter
Inform Kärcher Customer Service.
Remove belts or cords from roller brush
Inform Kärcher Customer Service.
EN
12
-