Installation - W&H Dem 10 Manuel D'utilisation

INSTALLATION

1
1. Mount the security valve (Water Block
2. Connect the water inlet tube (no.4) to the water inlet fitting and the Dem 10
tap.
3. Connect the spiral tube to the front connection in the Dem 10.
WARNING
Use only original spare parts.
The Water Block
water from flowing back and potentially polluting the main waterline.
For this reason the Water Block valve should be mounted vertically.
WARNING
Check that all the tubes are connected correctly.
Before connecting the tubes, check that they are correctly cut at 90° with no
uncut parts.
10
2
®
valve is fitted with a special one-way valve that prevents
®
) on the water inlet connection.
3
Dem 10