Resetting The Pressure Wave Sensor To Automatic Detection; Technical Data - Bosch rexroth 3842 559 921 Instructions De Service

28/30

Technical data

12.6 Resetting the pressure wave sensor to automatic detection

The control unit automatically detects the pressure wave sensor.
If the connection adapter is unplugged or gets loose, the control will stop and output error message F21.
If the control unit is to be operated without pressure wave sensor, the automatic detection must
be activated.
Button / display
or
P14
Button [1]
P60
or
P61
Button [1]
or
Button [1]
13 Technical data
Fig. 10: Electrical connection of the product
Bosch Rexroth AG, MPS: Control unit, 3 842 559 935/2019-08
Instructions
Push shortly four times in a row
A tone sequence resounds and "PXX" is shown in the display (A)
Push to select a menu item
Reset menu
Push to select menu item
Number of lifting modules
Push to select a menu item
Select menu item
Push to select menu item
1: Safety adapter active, (only with adapter)
2: Automatic detection active, (without adapter)
Select the desired setting
Push to confirm menu item
257
247,5
265,5
62
559 935-10