Ambient Conditions; Lifting Tables According To Din En 1570 - Bosch rexroth 3842 559 921 Instructions De Service

Description
Output power
Input voltage
Input current
Frequency
Output voltage
Total, output currents
Motor channels
Max. current per channel
Standby power
Synchronization
Performance level
Dimensions LxWxH
Protection class
Protection type

13.1 Ambient conditions

• The control and the accessories are intended for the stationary use in light
industrial indoor areas. With higher requirement, the components have
to be attached and installed with corresponding protection.
• Operating temperature: +5 °C to +45 °C
• Storage temperature –20 °C to +60 °C
• Relative humidity: max. 95%, non-condensing
• Installation height: max. 2,000 m a.s.l.
• Upstream supply fuse: EU ≤ 16 A, USA/CAN ≤ 15 A
• The area should be kept free of mold, fungus, rodents and other vermin.
• Do not install or operate in the immediate vicinity of industrial equipment
producing chemical emissions.
• Do not install or operate near sources of sand or dust.
• Do not install or operate in areas that are regularly subjected to high-energy
forces caused, for example, by presses or heavy machinery.

13.2 Lifting tables according to DIN EN 1570

• for the required IP54, measures on the user side are necessary
(Control unit: IP 40)
• The lifting modules and controls are optimized for pulling power. 150%
limitation of the motor torque according to DIN EN 1570 has to be provided
by the user.
Values (EU)
230 V
3.5 A
"b" [DIN EN ISO 13849]
267 x 66 x 39 mm
3 842 559 935/2019-08, MPS: Control unit, Bosch Rexroth AG
Technical data
Values (USA)
380 W
120 V (+10%, -13%)
6.3 A
50-60 Hz
24 V
19 A
3
9 A
250 mW
Modbus - 485
I /
IP40
29/30