Transport And Storage; Installation; Installation Requirements - Bosch rexroth 3842 559 921 Instructions De Service

** = 2 controls synchronized via distributions
Travel times
• At full load, the lifting modules can be moved for a maximum of 2 min.
in a row (with three lifting modules max. 1 min). Afterwards, a cooling time
of up to 18 min. is necessary (after 1 min. operation approx. 9 min.). The
control unit monitors the temperature and switches off with an error message,
if necessary, see section "Troubleshooting". After a cooling time of at least
one minute, movement is possible again with restrictions.
• The control monitors the converted energy. With partial load, correspondingly
longer movement is thus possible. At 50% of the load, the running time
is about doubled, etc. Tilting moments have a reducing effect.
6

Transport and storage

Protect the product from mechanical stress, dirt and humidity.
„
See also section "Ambient conditions".
„
7

Installation

Live components
Risk of death due to electric shock.
Protect all electronic devices from contact with liquids.
„
Protect connection lines from squeezing, bending and tensile load.
„
When installing the connection lines, secure them tightly and protect them
„
from mechanical loads.
In case of malfunctions, pull out the mains plug
„
7.1

Installation requirements

See also section "Technical data".
„
WARNING
3 842 559 935/2019-08, MPS: Control unit, Bosch Rexroth AG
Transport and storage 15/30