Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
30
NOTE:
2 anti-tip-brackets are required for each appliance.
The anti-tip-brackets must overlap a minimum of 2 1/8"
(54 mm) over the appliance to secure the appliance.
1. Install the anti-tip brackets at the rear of the enclosure,
locating the brackets based on stud locations and
product and enclosure dimensions.
2. Make sure the anti-tip brackets are securely attached
to a stud or other weight-bearing structure.
Do not attach brackets to drywall, cinder block, or
uncured concrete.
To ensure safety, at least one bracket must be
attached to a stud. Attach brackets to studs wherever
possible within the enclosure. Use a minimum of 3
screws or bolts to attach each bracket.
Brackets must be attached as shown at right. The brackets
could fail to prevent tipover of the unit if installed in an
alternate orientation.
Protecting Edges of Enclosure
To protect the front edges of the enclosure, tape thin
cardboard or some other protective material around the
edges.
Anti-tip brackets (2)
Concrete / Wood wall
5X45 6X (Hex)
/
"
>2 1
8
(54 mm)
Publicité
Table des Matières
