Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
40
Adjusting the Door Spring
Rotate the adjusting screw with the T20 bit
provided.
I = maximum spring tension
0 = no spring tension
(Optional) After adjusting the door spring,
attach the gray plastic sheets to hide the
adjusting screws.
Adjusting the Door Stop
The default door stop position is 115°. Follow
these instructions to change the door stop
position to 90°.
1. Open the door to 90°.
2. Insert the door stop pin in the holes which are
now aligned at the back of the hinge. Use a
rubber mallet to fully insert the pin.
Water Filter Bypass
Removing the Water Filter
it.
detailed instructions.
Publicité
Table des Matières
