Aligning And Leveling The Appliance - Signature Kitchen Suite SKSCF1801P Guide D'installation

32
B

Aligning and Leveling the Appliance

DEPTH ADJUSTMENT
Adjust the depth of the unit in the enclosure so the door
1. Measure the thickness of your decorative door
panels using the gauge tool.
place the gauge tool next to the panel. Mark the notch
on the gauge tool that matches the thickness of the
door panel.
2. Use the mark on the gauge tool to adjust the depth
of the appliance in the enclosure.
Place the gauge tool against the closed door of the
appliance at the side of the enclosure. The marked
notch on the gauge tool should align with the front
edge of the enclosure.
HEIGHT ADJUSTMENT
The front and rear leveling legs can both be adjusted
from the front.
Measure panel thickness
Align depth of unit