Bodet MICROQUARTZ 6 Instructions De Mise En Service page 23

Test 3 : Channel switches
Each channel switch when activated is displayed as follows :
Press RESET
Test 4 : Power supply / Radio / Impulse reception
1 : indicates presence (blinking for radio)
0 : indicates absence
Press RESET
Test 5 : Slave clock circuit
This test delivers fast impulses on clock circuit output 18.
Check with voltmeter.
Press RESET
Test 6 : Channel relays
Each relay is activated successively.
Check contact with ohmmeter.
Press RESET.
Test 7 : Memory
This test checks the 16 memory pages after a 5 sec. Stand-by.
Caution :
This test erases the data contained in the memory.
To avoid losing the data press RESET before the test starts.
END OF TEST.
Normal
Program
Stop
Impulse input
Radio synchro
Mains
23