Technical Characteristics - Bodet MICROQUARTZ 6 Instructions De Mise En Service

TECHNICAL CHARACTERISTICS

· Power supply : 220-240 V / 50-60 Hz or 110-120 V / 50-60 Hz
· Power reserve : over 72 h by electronic memory providing automatic resetting of slave
clocks as soon as the mains is re-established.
· Quartz Time base, accuracy : 0.1. sec/day between 20 and 25C.
· Radio synchronization by means of external antenna providing absolute long term
accuracy and automatic summer/winter time changeover (Europe only).
· Option : operation as slave clock on minute or 1/2 minute system.
· Outputs :
- 1 slave clock line : 1 A. 24 V. minute impulses duration 1.3 sec adjustable to 1/2
minute or SR2 or SR3 by programming.
- 6 channels with relays, contact rating 4 amp/240 VAC programmable in :
. Timer mode from 2 to 59 sec
. ON / OFF mode from 1 min to 7 days
. Impulses for slave clocks
The type of impulses programmable on the channels are :
- 220 V. 3 wires 1 min impulse for tower clocks (D1,D2 impulses)
- 220 V. Telesect 4-wires impulses
- SR3-3 wires impulse system with hourly supervision
- Sync-wired hourly and 12-hour correction system
· Programming cycle : 1 week
· Accuracy of programming : minute to minute.
· Programming capacity : 127 steps per channel.
· Channel controls : manual, automatic, off.
· Summer/winter time changeover programmable up to 1 week in advance.
· Operating temperature : 0 to + 50 C.
· Weight : 3,4 kg
14
To slave clocks
To circuits
To circuits