Bodet MICROQUARTZ 6 Instructions De Mise En Service page 21

- Set the circuit switch to Program.
The display shows the 1
- Press the ENTER key repeatedly to display the programme until
the display shows :
- Set the circuit switch to Normal.
- Set the keypad switch to OFF.
Erasing a programme step or a programme
- Set the keypad to switch to ON.
- Set the channel switch to Program.
The display shows the 1st programme step.
- Press the ENTER key repeatedly until the display shows the
programme to be erased.
- Press on DELETE : the display shows the following programme
step :
- Set the channel switch to Normal position.
The display shows the time of the day.
- Set the keypad switch to OFF.
To erase a programme completely hold the DELETE key pressed
until the display shows :
Manual controls of channels
- Set the keypad switch to ON.
- Set the corresponding channel (s) switch (es) to Program.
- Press MANUAL key : the corresponding channel relay will close and the LED will light up.
- Set the channel switch back to Normal.
- Set the keypad switch to OFF.
Cut off of channel(s) programming(s)
- Set the channel switch(es) to STOP position
st
programme step.
21