TEST PROGRAMME
This test is designed for trouble shooting.
It can be performed when installing.
Caution : This test cancels all the programming.
Starting the test programme :
- Remove the cover.
- Disconnect the clock and channels circuits to avoid activation of the equipments.
- Switch on the mains (green LED lights up).
- Press 6 times on RESET to display successively :
Test 1 : display
Each segment is displayed successively.
Press RESET.
Test 2 : Keypad (keypad switch on ON).
Each key has a code number which is displayed when pressed :
Key
Keypad switch
Second key
Minute key
Stop/start key
+ 1 hour key
- 1 hour key
Day key
Synchro
Enter
Delete
Manual
Press RESET.
22
code
ON/OFF
01
02
03
04
05
06
07
08
09
10