LaserLiner CondenseSpot XP Mode D'emploi page 15

Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limits in accordance
with the EMC Directive 2014/30/EU which is covered by the Radio Equipment Directive 2014/53/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity
of people with pacemakers – may apply. Electronic devices can potentially cause hazards or interference
or be subject to hazards or interference.
– The measuring accuracy may be affected when working close to high voltages or high electromagnetic
alternating fields.
Safety instructions
Dealing with RF radiation
– The measuring device is equipped with a wireless interface.
– The measuring device complies with electromagnetic compatibility and wireless radiation regulations
and limits in accordance with the RED 2014/53/EU.
– Umarex GmbH & Co. KG hereby declares that the CondenseSpot XP radio equipment complies
with the essential requirements and other provisions of the European Radio Equipment Directive
2014/53/EU (RED). The EU Declaration of Conformity can be found in its entirety at the following
address: http://laserliner.com/info?an=cospxp
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
Calibration
The meter needs to be calibrated and tested on a regular basis to ensure it produces accurate
measurement results. We recommend carrying out calibration once a year.
1
2
3
4
5
6
7
1
8
2
9
3
4
10
5
6
7
8
9
10
11
CondenseSpot XP
LC display
Memory function
Set emissivity factor
Mode setting: T-A, rH, dP, T-K,
HEAT, MAX, MIN, AVG, diF, dbu, Wbu /
ON
Humidity / ambient temperature sensor
Infrared sensor
8-point laser circle outlet
SET button
ON / trigger
Battery compartment
Sockets for K-type
11
15
EN EN