Menu Settings - LaserLiner CondenseSpot XP Mode D'emploi

5

Menu settings

+
ON
SET
dbu
Wbu
Cont LOK
HEAT
Send All
18
EN
°C
Dry-bulb temperature
When activated, dry-bulb temperature mode is available
in the mode selection (4).
OFF
Wet-bulb temperature
When activated, wet-bulb temperature mode is available
in the mode selection (4).
OFF
Continuous measurement
By selecting the „Cont LOK" function, continuous measurements can
be carried out without having to permanently press the trigger button.
OFF
Continuous measurement starts by briefly pressing the trigger button.
A lock symbol appears on the display. The value is held (HOLD) by
long-pressing the button again.
!
The battery charge must be at least 15%
for continuous measurement.
HEAT (thermal bridge mode)
Setting the sensitivity
MID
SET
Data transfer
Transferring the entire measured value memory via Digital Connection
OFF
°F
SET
ON
SET
ON
SET
ON
SET
LO
SET
ON
SET
Confirm
Confirm
Confirm
Confirm
HI
Confirm
SET
3 sec
Confirm