Installing The Shredding Disc - KitchenAid 5KFP1335 Mode D'emploi

SETTING UP YOUR FOOD PROCESSOR

Installing the shredding disc

IMPORTANT: When using the reversible shredding disc, have the desired side
(medium/fine) facing UP .
1
Holding the disc by the 2 finger grips,
insert the disc adapter into the hole in
the bottom of the disc.
3
With the work bowl installed, slide the
drive adapter onto the power shaft.
TIP: You may need to turn the disc/drive adapter until it drops down into place.
2
Slide the drive adapter into the disc
adapter as far as it will go, until it
clicks into place.
4
Install the work bowl cover, being sure
it locks into place.
19