Preparing The Blender For Use; Before First Use; Blender Assembly - KitchenAid KSB354 Instructions

Preparing the Blender for use

Before first use

Before using your Blender for the first time,
wipe Blender base with a warm sudsy
cloth, then wipe clean with a damp cloth.
Dry with a soft cloth. Wash pitcher, lid with
ingredient cup, locking collar and blade
assembly and sealing ring in warm, sudsy
water (see Care and Cleaning). Rinse parts
and wipe dry.

Blender Assembly

1. Put locking collar with blades pointing
up on a sturdy surface.
2. Put sealing ring, flat side down, around
the blades and into the groove within
the locking collar.
3. Align the pitcher tabs with the slots in
the locking collar.
4. Press down and rotate pitcher
clockwise, approximately ¼ turn until
two clicks are heard.
5. Put pitcher assembly onto the
Blender base.
sealing
Ring
NotE: When properly positioned, pitcher
assembly will rest completely on Blender
base. If not, repeat steps 3 and 4.
Locking
collar
6. Put lid on pitcher.
6
Gap
No
Gap