TIPS FOR GREAT RESULTS
Using the dough blade*
The dough blade is specially
designed for mixing and
kneading yeast dough
Helpful hints
• To avoid damage to the blade or motor, do
not process food that is so hard or firmly
frozen that it cannot be pierced with the
tip of a sharp knife. If a piece of hard food,
such as a carrot, becomes wedged or
stuck on the blade, stop the processor and
remove the blade. Gently remove food
from the blade.
• Do not overfill work bowl or mini-bowl*.
For thin mixtures, fill work bowl up to
1/2 to 2/3 full. For thicker mixtures, fill
work bowl up to 3/4 full. For liquids, fill
up to the maximum level as described
in the section "Using Your Food
Processor - Maximum Liquid Level".
When chopping, the work bowl should
be no more than 1/3 to 1/2 full. Use the
mini-bowl
for up to 235 mL (1 cup) of
*
liquid or 120 mL (1/2 cup) solids.
• Position slicing discs so the cutting surface
is just to the right of the feed tube. This
allows the blade a full rotation before
contacting the food.
30
quickly and thoroughly. For the best results,
do not knead recipes which use more than
350 g (3 cups) of flour.
• To capitalize on the speed of the
processor, drop ingredients to be chopped
through the feed tube while the processor
is running.
• Different foods require varying degrees
of pressure for best shredding and slicing
results. In general, use light pressure
for soft, delicate foods (strawberries,
tomatoes, etc.), moderate pressure for
medium foods (zucchini, potatoes, etc.),
and firmer pressure for harder foods
(carrots, apples, hard cheeses, partially
frozen meats, etc.).
• S oft and medium-hard cheese may spread
out or roll up on the shredding disc. To
avoid this, shred only well-chilled cheese.
• Sometimes slender foods, such as
carrots or celery, fall over in the feed
tube, resulting in an uneven slice. To
minimize this, cut food in several pieces
and pack the feed tube with the food.
For processing small or slender items,
the small feed tube in the two piece food
pusher will prove especially convenient.
* Included only in model 5KFP1335