Declaration Of Conformity - Beta 1900S Mode D'emploi

EN I
INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
MAINTENANCE
Repair and calibration jobs must be carried out by trained personnel only. For such jobs, you can contact Beta
Utensili S.P.A.'s repair centre.
DISPOSAL
The hose reel must be disposed of in accordance with the law provisions in force in the country where it is used.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the
environment or human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will
give way to the application of such fines as provided for under current regulations.
WARRANTY
This equipment is manufactured and tested in accordance with current EU regulations. It is covered by a 12-month
warranty for professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects, by fixing the defective pieces or
replacing them at our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this warranty
will remain unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls.
In addition, this warranty will no longer be valid if any changes are made, or if the pneumatic tool is forced or sent
to the customer service in pieces.
This warranty explicitly excludes any damage caused to people and/or things, whether direct or consequential.


DECLARATION OF CONFORMITY

We hereby declare, assuming full responsibility, that the described product complies with all the relevant provisions
of Machine Directive 2006/42/EC and amendments thereto.
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845 Sovico (MB)
ITALIA
9