Technical Data; Purpose Of Use - Beta C50S-O Mode D'emploi

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
OPERATION MANUAL AND INSTRUCTIONS FOR TROLLEY MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18
20845 Sovico (MB) ITALIA
Original documentation drawn up in ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the users.

TECHNICAL DATA

• Weight: 38 kg
• Maximum applicable static load, uniformly distributed on surface: 400 kg
• Drawer capacity:
70 mm
All stated capacities should be considered to be uniformly distributed on surfaces.

PURPOSE OF USE

The trolleyshould be used for the storage and transportation of tools and equipment in work environments,
according to such load capacities as listed in this manual.
WARNINGS OF USE
• Use the trolley on flat, stable surfaces.
• Do not exceed the maximum capacity of each drawer and the trolley as a whole.
• Do not open more than one drawer at a time, to avoid overturning.
• Do not use the trolley for any applications other than those listed above.
• Do not modify the trolley or any of its parts.
• Store the trolley in closed environments, sheltered from the bad weather.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can
contact Beta Utensili S.P.A.'s repair centre through your Beta dealer.
DISPOSAL
The trolley, accessories and packaging should be sent to a waste disposal centre, in accordance with
the laws in force in your country.
4
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
TROLLEY. FAILURE TO COMPLY WITH THE SAFETY STANDARDS AND
OPERATING INSTRUCTIONS MAY RESULT IN SERIOUS INJURY
15 kg
EN I