Battery Replacement; Declaration Of Conformity - Beta 1497L Mode D'emploi

ADDITIONAL INSTRUCTIONS
LASER VIEWER BATTERY REPLACEMENT
Loosen the two screws on the laser viewer
cover and replace the 3 1.5V AA batteries,
paying attention to polarity; close the viewer
back, fixing the cover with the screws supplied
with the device.
CAUTION!
For a longer life, alkaline batteries
should be used.

BATTERY REPLACEMENT

If the battery of the headlight tester needs
replacing, take the following steps:
Using a cross-head screwdriver, unloose the
two self-tapping screws fixing the battery
support to the rear optical chamber lock.
Remove the support; take off the battery;
remove the connector and replace the battery.
Mount everything back, repeating the above
operations in the reverse order.
CAUTION!
For a longer life, alkaline batteries
should be used.
ADDITIONAL INSTRUCTIONS
CLEANING AND MAINTENANCE
The device does not require any special
maintenance jobs other than ordinary cleaning,
to be performed with a damp cloth (use water
and alcohol, or standard detergent).
CAUTION!
Do not use any nitro solvents.
CLEARING
The device is mainly made from steel.
Other parts:
plastic, a few details
cardboard and paper, packaging and
documents
device paint, scratchproof epoxy powder.
To dispose of the device, follow local
authorities' instructions.

DECLARATION OF CONFORMITY

The product Beta 1497 complies with the
Electromagnetic Compatibility (EMC) Directive
89/336/EEC issued by the European
Community Commission.