Purpose Of Use; Work Area Safety - Beta 1900S Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
INSTRUCTIONS FOR USE
ISTRUZIONI PER L'USO
AUTOMATIC HOSE REEL ART. 1900S, 1900M
OPERATION MANUAL AND INSTRUCTIONS FOR AUTOMATIC HOSE REEL MANUFACTURED BY:
BETA UTENSILI S.P.A.
VIA A. VOLTA 18, 20845, SOVICO (MB) ITALIA
ORIGINAL DOCUMENTATION DRAWN UP IN ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the users.

PURPOSE OF USE

The automatic hose reel can be used for the following purposes:
• piping compressed air or cold water
• the automatic hose reel can also be used in open places, avoiding direct exposure of the hose reel to bad weather
or sunlight
The automatic hose reel must not be used for the following operations:
• no combustible "liquids and/or gases" may be used
• no corrosive substances may be used
• the automatic hose reel must not be used with fluids at temperatures higher than the temperatures stated
in the TECHNICAL DATA table
• the hose must not be used for hooking or dragging material

WORK AREA SAFETY

Danger over tripping over the hose.
Do not operate the automatic hose reel in environments containing potentially explosive atmospheres,
because sparks may be generated, which can ignite the dust or fumes.
Contact with live equipment should be avoided, because it may cause electric shocks.
Avoid contact between the hose and incandescent or hot parts.
Keep children and bystanders away from your workplace while operating the automatic hose reel.
Distractions from other people can cause you to lose control over the automatic hose reel while using it.
AUTOMATIC HOSE REEL SAFETY
• Install the hose reel by firmly fixing the revolving metal bracket to a wall or a stable structure, making sure that
it can support the load.
• Do not direct the compressed air output or the fluid passing through the hose towards people or animals.
• Check the connections and the air supply lines. All units, couplers and hoses should conform to the product
specifications in terms of pressure and air volume. Too high pressure impairs the function of the hose reel and
may cause damage and/or injury.
• Do not bend or tighten any hoses; avoid using solvents and sharp edges. Keep the hoses away from heat,
oil and rotating parts.
• Immediately replace any damaged hose. A defective feed pipe may cause uncontrolled movements of the
compressed air pipe. Raised rust or chips may cause eye injury.
• Make sure that the hose clamps are always secured firmly.
6
IT IS IMPORTANT TO READ THIS MANUAL THOROUGHLY BEFORE
USING THE AUTOMATIC HOSE REEL. FAILURE TO COMPLY WITH THE
SAFETY STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY.
EN
I

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1900m

Table des Matières